eFlo L – Electronic Liquid Flow Meter
eFlo-L is an electronic flow measurement instrument used to display and control the flow of liquids. With simple compatibility with existing controls, tracking and monitoring liquid flows has never been easier. Designed for use in the harshest industrial environments, eFlo allows for easy replacement of manual flow meters and seamlessly integrates into existing control systems.
Features and Benefits
| Available with electronic valve and without control valve |
| Digital display with easy-to-use touch pad |
| Precision flow measurement |
| Direct and remote setpoint control |
| Utilizes FlowMeter View software |
| Easy retrofit for existing flow measuring equipment |
| Flow calibration can be certified while in use to meet CQI-9 requirements |
| SCADA Integration: Current Flow, Totalized Flow, Setpoint, Cost Calculation |
| Built-in high/low flow alarms |
| Flow totalizing |
| Analog control and feedback for data acquisition |
| Integrated comms via Modbus over RS232 or RS485 |
| Indicator LEDs: Process Data Display; Alarm (Hi/Low); Auto/Manual; Open/Close; Motor Drive |
| Tactile Keypad: Totalizer; Reset; Setpoint; Auto/Manual; Setup |
| USB configuration |
| Ethernet |
| Mobile friendly configuration |
| 1/2" NPT |
| Power Required: | 24VDC @ 400mA |
| Accuracy: | ±4% |
| Turndown Ratio: | 6:1 |
| Medium Temp. Limits: | -10°F to 150°F (-20°C to 65.6°C) |
| Ambient Temp. Limits: | -10°F to 150°F (-20°C to 65.6°C) |
| Flow Output Signal (Linear): | 4-20mA |
| Max. Output Signal Load: | 500 Ω |
| Input Control Signal (Linear): | 4-20mA |
| Response Time: | 1 - 10 seconds |
| Communications: | RS232, RS485, Ethernet |
| Communications Protocol: | Modbus RTU, TCP |
| Flow Meter Pressure Limits: | 50 psig max. |
| Pipe Fitting | 1/2" NPT |
